| 1. Test speed: | 1-25 times/min |
| 2. Rotation Angle: | can choose the working mode of repeated rotation or single-direction rotation |
| 3. Sensor: | 200kg |
| 4. Counting range: | 0-999999, with memory function of stop and power off |
| 5. Height of bearing surface (cushion) | 300 ~ 850mm |
| 6.Diameter of turntable | about 900mm |
| 7.Power supply (power) | single-phase 220V/50Hz/3A |
| 8. Air source: | air pressure: ≥ 0.5mpa; Flow rate: ≥800L/min; The air source is filtered and dried |
| 9.Body size | about 1220*1200*1960mm (length * width * height) |
| 10.Weigh | about 390kg |
| 11.Mechanical structure | ensure that the eccentricity between the load force of the chair and the pressure bar is 2 inches |
| 12.Standard accessory (distribution) | chair anti-turning block |
|
Control system |
|
| 1. The touch screen is equipped with PLC, with the memory function of power off and on; | |
| 2. With breakpoint protection (alarm) function, deceleration motor + frequency conversion control; | |
| 3. Manual pressure regulation, SMC precision barometer; | |
| 4. Memory function of stop/power off counter; | |
| 5. Select arbitrary or 360-degree rotation mode. | |
|
Working principle |
|
| 1. Motor driven test platform rotation; | |
| 2. The cylinder output pressure is applied to the sample; | |
| 3. Output digital signal of touch screen; | |
| 4.PLC controls the rotation Angle and rotation mode of the motor. | |
|
Conform to the standard |
|
| QB/T 2280-2016 | BIFMA X5.1-2017 |
| BIFMA X5.1-2017 | |